|
North Central OH | Make sure you have all the rust off the hubs where the rotor mounts. Just went thru this after changing the brakes on a 2014 equinox, about 1,000mi in it developed a tick while braking. Tried new rotor thought I got a bad one, no change. Went out and got a dial indicator discovered rotor had 0.015" run out and near the hub 0.005" of run out. Needle scaled the hub and all is well except I have an extra rotor, 5 thousands of an inch of rust can drive you crazy.
indicator I used https://www.harborfreight.com/clamping-dial-indicator-63656.html?_br... | |
|