|
Watertown, WI | Looking for some help on my 20/20 with net applied force. I can't help but think there is a software bug. I just can't believe it although since downforce is such a big deal in the 20/20. That's why I need someone to verify my sanity.
Each planter make has a control bag ratio, psi to lbs. Precision even publish it. My White is 5.4 lbs per psi. The problem is that the Net Applied Downforce which is displayed on the home screen and on DownForce Details only seems to use two ratios, 3.3 for single airbags and 4.4 for dual airbags. When I change planter make, applied downforce doesn't change. In reality, my White is putting out 440 lbs when it is set to only 330. That's a huge problem.
I found the issue when trying to ballast my planter, matching toolbar weight to downforce requirements. It's a Gen 1 and I'm running in manual mode. I'm hoping that I'm just missing something, cause else someone needs to get fired at PP for missing that all these years! | |
|
Precison Planting AirForce Applied Net Force Error
