|
Southeastern IL | Have a John Deere 1795 with new 16" OEM no-till cutters, and approx 14 3/4" to 14 7/8" disc openers. The no-till cutters are adjusted all the way up, and with the main bar level, the cutters are still running 1/2" deeper than the openers. I would like to see the no-till cutters 1/2" shallower than the disc openers. I can raise the 3pt hitch, make the bar high in the front, and get the cutters about even with the openers, but do not like it. Why with the bar level, can I not get the cutters shallower than the openers? Deere dealer has no idea. They suggested taking them off or dealing with it. Only option I see is taking off the new cutters, and replacing them with half wore cutters. What am I missing here???
(thumbnail_20190514_091251 (full).jpg)
(thumbnail_20190514_091239 (full).jpg)
(thumbnail_20190514_091450 (full).jpg)
Attachments ---------------- thumbnail_20190514_091251 (full).jpg (124KB - 28 downloads) thumbnail_20190514_091239 (full).jpg (90KB - 34 downloads) thumbnail_20190514_091450 (full).jpg (83KB - 24 downloads)
| |
|