|
Jewell County KS | Changed hyd filters on my MF 3650 and found some chunks of brass in the righthand filter and finer stuff in the lefthand side. The picture with the 2 rags is left and right filter. The big pieces are about 1/4 " thick and probably goes around a 1-1.5" shaft or something. One piece appears to have a machined flat on it. Tractor is hard to shift with both the shuttle shift and 1-2-3-4 lever also.
Has anyone been into one of these and recognize where the brass
may be from ? I haven't looked in the partsbook yet but plan to. I may also pull the shift fork plate out of the right side of trans and see if I see anything there.
(IMG_20190515_095050592 (full).jpg)
(IMG_20190515_095102573 (full).jpg)
(IMG_20190515_095113308 (full).jpg)
(IMG_20190515_095119726 (full).jpg)
Attachments ---------------- IMG_20190515_095050592 (full).jpg (77KB - 52 downloads) IMG_20190515_095102573 (full).jpg (148KB - 44 downloads) IMG_20190515_095113308 (full).jpg (129KB - 44 downloads) IMG_20190515_095119726 (full).jpg (142KB - 45 downloads)
| |
|