AgTalk Home
AgTalk Home
Search Forums | Classifieds (5) | Skins | Language
You are logged in as a guest. ( logon | register )

No radar detected on gen 3 20/20
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
Posted 5/16/2019 07:57 (#7499700 - in reply to #7498160)
Subject: RE: No radar detected on gen 3 20/20

Southern Minnesota Between Freeborn & Wells
abaum565 - 5/15/2019 07:39

Yes radar does work on the intelliview. Forgot to ad that when I have radar selected for the speed source in the intelliview AND the radar cable adapter plugged in there is no speed reading on the tractor display, unplug the adapter and it works, so I set the speed to wheel speed and the tractor reads the speed but still not the 20/20

I’ll crawl under there and look though

If plugging in the adapter causes the the tractor display to drop out, I would in inclined to think there is a problem with the adapter. I'm not familiar with the A post connector on that tractor but it might be grounding the radar signal thus the tractor itself is fine without it. Grounding the signal should not cause permanent damage but would prevent it from working.

Edited by tedbear 5/16/2019 09:09
Top of the page Bottom of the page

Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)