Deep southern Illinois | sunman - 5/9/2019 05:28
Sounds very frustrating....I have one more suggestion. I have had more than one wheel angle sensor that had issues with the wires going into the connection. It's a 3 pin weatherpack. Give a little tug on each of the wires individually. Make sure they have a good connection. I have had to replace the weatherpack on 3 or 4 different vehicles.
I'm assuming it has the add-on wheel angle sensor & not an OEM one....
Sorry guys, forgot to mention in my previous post, this is a magnum 275 running an accugide ready system. Case IH hydraulic valve and wheel sensor. I’m also trying to figure out if I can replace the case wheel sensor and harness with Agleader, and continue using my case hydraulic valve. |