|
| So we ran into an issue and are desperately looking for advice. We just purchased slightly used LSW tires. (110045R46/100040R32.. they came off of a 2014 JD 8R tractor...the problem we ran into and didn't know about ahead of time was that there is two different type of 8R tractors..a 31mph and a 26mph... we have a 2012 8285R duals/ILS which is 16 3/4" diameter (26mph).. apparently the 31mph 8r front hub wheel pattern is 19 3/4".... the rears line up just fine at 32"...
My question is has anyone found an adapter for the two? From my understanding ...they do not sell the wheels/rims separately from the tires? Since the rears line up fine and the seller wouldn't want to sell them separately...would anybody be interested in purchasing the fronts from us?
In a bit of a jam any help would be sincerely appreciated.. this is what we get when we have to much time on our hands in northern IL...since we are flooded and only have a fraction of seed in the ground compared to last year where we were done planting by May 2nd.
Thanks in advance | |
|