AgTalk Home
AgTalk Home
Search Forums | Classifieds (7) | Skins | Language
You are logged in as a guest. ( logon | register )

Trimble CANbus and FieldView puck
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
NOCO_Farmer
Posted 5/6/2019 21:23 (#7480569 - in reply to #7480509)
Subject: RE: Trimble CANbus and FieldView puck


NE Colorado
If it were me I would call AgExpress and have them build you a Y-harness that ties your guidance into the can of the tractor, with a the tag end being a 9 pin plug to plug the drive into. Or like I did, I eliminated a monitor and ran it all through 1 with a custom Y-harness. In my case it was a Case all makes ISO harness tied into the tractor can system, and then Fieldviews Case IH Y-Cable. I did this on 3 tractors, including 1 that does not have a CAN based system at all. I think those custom harnesses cost me $200 or so if I remember correctly.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)