|
Manitoba | Im putting this on my air seeder for liquid fertilizer rate control and section control. But only one section. Ive got everything connected but having trouble with the setup. One window that pops up says:
Field iq has no channels configured.
Also: RSCM sn (Long number) Please load the correct implement config or go to Field iq setup.
Ive been through the setup a dozen times. Got it to go to a field page earlier yesterday so thought I had it but later it was back to telling me things were not setup or configured. I set up my sprayer with Field iq on a FMX about 5 years ago and had no trouble. Any ideas? Thanks
: | |
|
Frustrated with Field IQ setup on FMX
