|
central, minnesota | I’m trying to get my get strip-tiller to work. Can’t get the rate to vary and I think I need to add an implement switch. Can anyone give me some guidance as to the proper hookup and settings to run theses valves. Thanks
The big valve have yellow and green wires and the other valve has 2 red wires. The connectors were gone and I completely replaced the wiring harness with new stuff from Trimble.
Edited by Jonb 4/20/2019 21:30
(5B14D477-195B-445A-ADE7-932D4ECA818A (full).jpeg)
(6BFEF75E-50EE-4448-A2D4-18E9DDB3799E (full).jpeg)
(4AB49B3B-A33C-4F37-8EF3-D69DDADC22C7 (full).jpeg)
Attachments ---------------- 5B14D477-195B-445A-ADE7-932D4ECA818A (full).jpeg (120KB - 80 downloads) 6BFEF75E-50EE-4448-A2D4-18E9DDB3799E (full).jpeg (110KB - 79 downloads) 4AB49B3B-A33C-4F37-8EF3-D69DDADC22C7 (full).jpeg (178KB - 72 downloads)
| |
|