Posted 4/15/2019 19:53 (#7441372) Subject: Ag leader STMM module on kinze 16/31
Last year in installed a ag leader STMM module and wiring harness on a kinze 16/31 planter. When I installed the wiring harness in put 1 through 16 on the rear " corn units" and 15 through 31 on the front rows. When I had a row fail it wasnt the row I thought it should be.
After looking at ag leader installation directions. It was showing that I should have started row 1 on the rear and alternate from front to back all the way through 31. Is this right?
The way I have the wiring harness can I just go in the monitor and change which rows are what. Without redoing the whole harness