|
Hennepin, IL | So you've had some advice from all over the board. For simplicity sake, ignore the margin reading, and stay out of manual mode. Set it to standard mode and see what it does. If your clay knobs are shallow, set it to heavy. If they're still shallow, you probably need to verify there isnt anything else going on. Check the Applied Downforce map on FV. If it is maxed out (600lbs) and the colors dont change, theres a good chance you have something else going on. I've seen plugged hydraulic tips cause this, or anything that could cause a blockage, it could be lifting the planter bar up on those knobs as well. All things to consider. | |
|