|
southern Illinois | I am new to the raven system. I loaded water in the sprayer today to spray in the drive just to flush out the tanks and see that everything works on this new to me apache sprayer. I read the quick reference book and I think i turned the product 1 from automatic to manual and got it to spray each section sitting still but over 3 sections at once the pressure dropped to low to keep the tips on. I could not figure out how to increase pressure to run all the sections at once sitting still in manual. What am I now doing right?
Thanks for any info.
Edit, Sitting with boom off the pressure was 80psi on the window gauge and closing the agitator would raise it to 120 but I had no volume I guess to run more than 3 sections.
Edited by commissioner 3/19/2019 18:50
| |
|