|
WCIL | Here is what i ended up with. I used 3x3 square tubing tack welded to the bottom to hold some 2" conduit in place. I'll add zip ties to keep it secure. I was able to fit the harness and one 5/8 hose in there and run the other hose down the draft tube with the others. Thanks for all the ideas everyone.
 (15527569449507594703318127500073 (full).jpg)
 (15527569744461298743470526222019 (full).jpg)
Attachments
----------------
 15527569449507594703318127500073 (full).jpg (137KB - 44 downloads)
15527569744461298743470526222019 (full).jpg (107KB - 42 downloads)
| |
|
Running more hoses and wires on top of draft tube
