|
Chilliwack BC | That’s good to hear. I’ve bought a couple of those when the factory valve can no longer hold a load. Most recently, our Cat telehandler would drop bales from the bale grapple and one of those fixed it. Your mounting job is tidier than our baler twine though :)
Those valves are actually mounted in quite a few factory applications where you really don’t want a cylinder to creep or someone could get hurt if a hose or valve fails. (Plough and telehandler in pictures. )
 (3C8E0C87-96AA-4963-868D-B96053121D9E (full).jpeg)
 (37C64AD1-4190-4F81-87D5-2136FCBAC702 (full).jpeg)
 (3C6CD4D8-38DF-4A10-922E-03DF3E6814FB (full).jpeg)
Attachments
----------------
 3C8E0C87-96AA-4963-868D-B96053121D9E (full).jpeg (195KB - 22 downloads)
37C64AD1-4190-4F81-87D5-2136FCBAC702 (full).jpeg (105KB - 19 downloads)
3C6CD4D8-38DF-4A10-922E-03DF3E6814FB (full).jpeg (175KB - 19 downloads)
| |
|
Thank you Plow79
