|
| Tote of Bicep has settled out where the bottom half of tote is thick like Elmer’s glue. Atrazine...
Have put air through the 2” banjo valve to try to let the air do some mixing but it doesn’t go throughout the tote, rather escapes upward close to the ball valve.
Have also used a mixer on an electric motor, but the paddle doesn’t go all the way to bottom.
I emptied what I could from this tote into another, and what is left is the thick atrazine, while other tote appears to be normal consistency.
I’m thinking I could cut the top of the tote off of the thick stuff to better access it where I could get the mixer or something else to stir it where it would get to the bottom of the tote.
Maybe add some of the other better product back to it and see if it will mix together better
Waste of time? I don’t really want to add water if I can avoid it and I want to get it mixed back to keep the ratio of metolachlor/atrazine correct
Think a compatibility agent could help?
Other ideas? | |
|