|
| You need to make some shielding to do tall crops. It isn’t the engine that breaks the corn off, it is the the wheel drive motors. The legs are not smooth so it sometime guides the corn under motor and snaps it. You need to have rails on the inside and outside of machine the whole length of the machine for crop and machine protection. Just guide the corn under machine at the entry points and you will see very little damage, that includes guiding it around the engine and rear wheel legs. Make sure to guide the corn around the hoses on the front legs also.
I thinks a 2275 has a rotating screen so I don’t know if need a reversing fan, on 2200ht you do, otherwise you will be brushing off the screen every ten acres.
Edited by Magicmatt41 2/16/2019 18:12
(C3BFB691-CBB9-4C3C-B0F1-021C2BFC6D81 (full).jpeg)
(26A5BC35-7833-4A82-8AF4-9AEA93ABD7BD (full).jpeg)
(9ACE8A38-235B-4E5D-A447-07F2CAAF84FC (full).jpeg)
(457A5A51-AC82-4CF4-858B-36A62886F42C (full).jpeg)
(BC6D6064-1D7F-42FD-91EB-EB1E37C893F2 (full).jpeg)
(1591398C-C61F-48B9-BAE8-5BDCB535592D (full).jpeg)
Attachments ---------------- C3BFB691-CBB9-4C3C-B0F1-021C2BFC6D81 (full).jpeg (130KB - 37 downloads) 26A5BC35-7833-4A82-8AF4-9AEA93ABD7BD (full).jpeg (158KB - 27 downloads) 9ACE8A38-235B-4E5D-A447-07F2CAAF84FC (full).jpeg (183KB - 26 downloads) 457A5A51-AC82-4CF4-858B-36A62886F42C (full).jpeg (193KB - 26 downloads) BC6D6064-1D7F-42FD-91EB-EB1E37C893F2 (full).jpeg (226KB - 25 downloads) 1591398C-C61F-48B9-BAE8-5BDCB535592D (full).jpeg (179KB - 27 downloads)
| |
|