AgTalk Home
AgTalk Home
Search Forums | Classifieds (69) | Skins | Language
You are logged in as a guest. ( logon | register )

Help setting BBI spreader for lime.
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
redneckfarmer
Posted 2/15/2019 20:24 (#7323344 - in reply to #7323254)
Subject: RE: Help setting BBI spreader for lime.


missouri
have a bbi endurance litter spreader (34 inch chain) and for lime for 2 ton i set the gate at 7-8 inches and slow the chain down just slightly from 2 ton of litter rate. about how i set the chain for 1.5 ton of manure. leave the spinners wide open and get about 30-32 foot spread on dry lime. even with the 7-8 inch gate sitting it still keeps quite a bit of lime piled up at the back of the spreader. i built an inverted v for ours. full of litter ours will only hold 10 ton of litter and the pressure gauge runs about 850-950 on chain pressure with litter and about the same with 10 ton of lime. maybe up to 1000 at start up on lime. Thats with the v in it though.



(DSCN3756 (full).JPG)



(DSCN3757 (full).JPG)



(DSCN3769 (full).JPG)



(DSCN3787 (full).JPG)



Attachments
----------------
Attachments DSCN3756 (full).JPG (132KB - 43 downloads)
Attachments DSCN3757 (full).JPG (107KB - 39 downloads)
Attachments DSCN3769 (full).JPG (81KB - 30 downloads)
Attachments DSCN3787 (full).JPG (83KB - 33 downloads)
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)