|
| I need a voltage tester to test dc voltage on some precision ag equipment installed on a tractor I have.
I’ve never used a voltage tester before. Any help is appreciated.
Tech support told me I need to check one part of the system to confirm it has between 1.5 and 3.5 volts. So I assume the tester needs to measure voltage accurately that low.
I also need to check another part that is supposed to have 12 volts. Both of the above I need to check in the female end of a harness.
Finally, I need to check resistance between two pins on a CAN terminator to confirm it has exactly 150 ohms resistance between the pins.
What do I need to buy? Can I get one from a big box store or are they too specialized and need to look elsewhere?
Edited by sparrell 2/15/2019 18:27
| |
|