|
| Bought a #6333 new in 2011 25 ft with high residue harrow. Pulled it ok with a NH8970 at appx. 6mph in silt loams at 4 inches but at 5+ inches you had to shift down or the pyro would rise quickly. Now pull it with CIH 260 which is a good match. Heavy and well built tool. Have not had issues with plugging in mainframe, but have had issues with harrow balling up if residue is damp in stalks,even if running on a sizeable angle.Would reccomend at a minimum 10 hp per foot of width if you plan to run 6MPH. | |
|