|
s nd | I had a shop bend me a couple pieces of tin at an angle the height of my door (14). Then cut some styrofoam in 4x4 and glued it to the angled tin and put them on the inside corner of the door. Made a bracket that squeezed them into the corner. Nailed a half inch by four piece of ribbed styrofoam along the inside post so styrafoam sealed up pretty good. I had posts out front beside the door, so pushed a piece of styrafoam in between and pushed the door tight to the shop. Laid 4x4 pieces also on the floor. Got some heavy belting for along the top. Oh boy, I don't miss that door, but you do what you have to do. | |
|