AgTalk Home
AgTalk Home
Search Forums | Classifieds (119) | Skins | Language
You are logged in as a guest. ( logon | register )

Field IQ section control JD 1990 Drill
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
mattey999
Posted 2/11/2019 14:02 (#7313860 - in reply to #7313825)
Subject: RE: Field IQ section control JD 1990 Drill


Ohio
Yes that is very possible. Really not hard to do, just remove the coupling that joins the gearbox to the main drive and put a sprocket on the hex after that. Mount a hyd motor to the back from and run a chain up the the new sprocket. We have done a couple of them. You will need pn: 83348 to carry the electric load for those clutches. You can also do population and blockage to that planter as well to complete the setup.

Option number 2 would be look into https://www.intellidriveusa.com/
This would give you more sections on that planter and vrt as well.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)