Posted 2/10/2019 19:59 (#7311946 - in reply to #7311237) Subject: RE: Seed Monitoring Ag Leader Incommand 1200
KMech - 2/10/2019 13:30
I've seen great results with the newer Kinze sensors when used in the standard mode. They've been the least affected by dust of all the sensors I've seen, although I have a feeling that might not apply equally or at all in the dickey-john mode. To be fair to the wave visions, I have to admit I haven't had enough experience with them to judge them fairly yet.
Did you find a wave vision with a larger tube, or did the standard tube size work well enough?
On the conversion of sensors, I'd figure the wave visions to be a no-brainer. When converting anyway, they're not much more than the standard dickey-johns. I will get to see them this spring. I put suredrive on for a local customer, and the suredrive system requires DJ sensors. I got him wave visions (his was older than 2013...no dual boot sensor). When using them on the STMM, do you have to use Precision's power module to feed them more power?
The Ag Leader RCM provides ample power for wave visions regardless of number of rows. Booster not needed. There is a KB Article that references this.