AgTalk Home
AgTalk Home
Search Forums | Classifieds (217) | Skins | Language
You are logged in as a guest. ( logon | register )

Ubiquity help
View previous thread :: View next thread
   Forums List -> Computer TalkMessage format
Posted 2/9/2019 15:38 (#7309330 - in reply to #7308830)
Subject: RE: Ubiquity help

North Central Oregon
Here is a link for setting up an M2 as an Access Point.

The biggest problem I can see with this is that your devices in the metal shop may be able to receive a signal from the WAP but not be able to get a signal out to it. The M2's are 2.4Mhz so setting up a bridge to a wireless router in the Shop that has both 2.4 and 5 is nice if the devices you are using at that end can use it. And yes there is some configuration required depending on what you want to do. Ubiquity has some pretty good instructions on their website that can walk you through the process.

link to Point to point bridge.
Top of the page Bottom of the page

Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)