|
Butterfield, MN | The other thing that can cause issues like this, since you've turned he disengage setting up basically all the way, is that there is an issue getting enough current for the system. Where are you getting power to the larger wires? If there's a restriction in current, it will throw off the circuitry that affects the system disengaging and cause it to act this way. I don't recall what type of tractor this was installed in, but if it's a John Deere, please don't connect to the power strip.
It could also be at the plug to the MDU. Make sure that it's clicked in on both sides, not just clicked in on one side.
Edited by Amc4life 1/24/2019 17:03
| |
|