|
Lakeville, MN | I don't know this for sure but I would assume that the switches on the CNH pendant controls are variable resistance switches similar to steering wheel controls in automobiles. I don't believe that each switch has it's own wires back to the arm controller. This type of switch and control works with minimal wires and requires a lot less space. I have not pulled apart the arm in our tier 4b to see what it has for wires but this is what I would expect to find. So at that I don't see using the factory engage button for a aftermarket install. If you have a nav 2 and a receiver already in would just go with a pro 700 to be able to use the factory button and have the option for the iso connection to all be integrated. | |
|