|
NEMO | We have a 2015 320T and have not had any engine issues nor have I heard of any.
I think they may have changed engine designs around 2012-2014 but I'm not certain.
The side entry is the main reason I went with a JCB and I'm very satisfied with the machine.
Some people are leery of the single lift arm as far as strength but I've been pulling and digging trees with a Danuser Intimidator
for weeks and have not had nor expect to have any issues.
Just grease pivot points daily and have been told to replace pins every 1000 hours or when slop is evident.
If you have any specific questions I'll be glad to attempt to answer them. | |
|