|
East Central, Nebraska | i also did not know about the certification but i have been doing this for years on an integra and now an incommand with no issues. it seems to me that when i got the incommand and plugged the drill into it i had to wait what seemed like an hour for it to come up on the screen. i have no idea what that process is but i waited and all was fine. i would check power sources and try to trace the cabling and see if you have any wiring problems.
it may not be certified but that particular situation i have seen work perfectly for years.
i also have a deere round baler (569 premium) that runs on isobus that i was told would not work, it has also worked for years.
if your sure its the integra, try to get your hands on an old 1800 or 2600 deere display and confirm if it runs smooth or not, that would narrow a lot of stuff down. | |
|
AL Integra virtual terminal with Deere drill
