|
West Central Wisconsin | I want to add an observation. I think my set up is too big for the amount of time I spend in there. I keep thermostat at lowest 45* setting and turn it up when working. It might be days that I'm not working in there and because the shop is well insulated the heater does not kick on that often. Because of this when it does run there is a lot of condensation that runs out the exhaust and freezes under the outside vent. Depending how often you are in the shop you may want to have a smaller btu unit that runs more often and hotter to burn off any condensation. The condensation seems quite corrosive. | |
|
Radiant Tube Heater - U shape tube vs strait tube
