E. CO, exactly half way between NE and OK | I bought a MG-1 that had one track off and I don't know if the other track would turn. I welded two channel irons together for each track to form a box. We set the MG-1 on the irons and used the winch truck and winched them up the ramps of the trailer and onto the trailer. If you could get the tractors on box irons like that, you could use pipe and roll them upon the trailer.
I was going to take a picture of the box irons we used but it is too dark outside now. If you want me to tomorrow, let me know.
Edited by wht one 12/9/2018 18:05
 (DSC00077 (full).JPG)
Attachments
----------------
 DSC00077 (full).JPG (120KB - 34 downloads)
|
Moving a froze up crawler
