Posted 12/6/2018 15:04 (#7153380) Subject: Problem Starting Big Square Baler
We use a New Holland 8670 to pull a 330R big square baler and have trouble killing the engine when starting the baler with a bale in the chamber.
If you idle up much the tractor clutch slips, at lower rpms you kill the engine. We have checked oil pressures and phase in timing everything is within specs
although oil pressure is at the low side of the range. If you put the tractor in gear and are moving when you engage the clutch you can get it started but
seems awful hard on things. Any input would be appreciated