|
Eastern Nebraska | As WildMan was alluding to, you want to break the tree out down to the Grain Harvest level in the tree if you want to scale the whole field (or you can go further down the tree if you wanted to just 1 crop type, 1 hybrid or even load), right click it and click Add Simple Analysis, select scale data, and select Yield (dry) to scale by. You then want to figure out the % you were off based on the data. The scaling works as if it were 100% so if you scale up by 3% you would scale the factor by 1.03. If you scaled down by 3%, you would set the scale factor to 0.97. Obviously the more decimal places you round out to, the more accurate the data. | |
|