|
Winkler, Manitoba Canada | Not like a 550, or at least not the same.
The cyclone intake was located where the rotating drum is on your machine. Basically tried to feed dust around the radiator through an air duct. Your machine obviously had the cyclone system at one time, as the metal is cut away on top to allow it to fit.
Here is a poor pic of a combine with the system installed.
Edited by WTW 11/26/2018 11:18
(MF750 (full).JPG)
Attachments ---------------- MF750 (full).JPG (98KB - 29 downloads)
| |
|