|
| I don’t believe it can be the Ethernet cable as all paradyme information comes up on the console. The satilite icon remains green, as well as the steering activation icon in the lower right corner. The tractor just slowly drifts off course as if the auto steer wasn’t activated. When the wheel is turned to return to the a-b line, it gives the audible warning that operated is turning wheel (or similar), and steering is disengaged ( even though it wasn’t steering).
In the paradyme menu, I’ve watched the wheel angle sensor count while turning the wheel several different times and can’t notice any issues. I can’t remember the actual paradyme menu name, but The tractor will not steer when doing the hydraulic valve test ( hard left, hard right, ect.) Since there’s no valve response during this test, I assumed it wouldn’t be beneficial to create a non-wheel angle sensor configuration.
| |
|
Ag Leader steering rant
