roaming | croptecsolutions - 11/7/2018 18:09
I'm relatively new to guidance but I have a wd2104 windrower with pro700 nav and 372 rangepoint rtk. I cannot get this thing to drive centered to the header. I have no offsets in the system. First off the guidance lags about 3-5 seconds behind real time. This is part of the problem but the main problem is the left hand side of the header overlaps about a foot and the right hand side is about as close to exactly on the cut line as it can get. If its leaving a 2" strip it will do it the length of the field. Every pass.
I have a 16 foot disk head. Set with 15' working width. But I cannot figure out why it wont center the machine on the line.
It even shows the overlap on the display. I'll try anything if someone has an idea. TIA
What software versions are you running?
Can you confirm what kind of GPS you're running? There is Rangepoint RT*X* and there is RT*K*, but there is no such thing as "Rangepoint RTK". Need to know exactly what correction level you're running.
Is the receiver physically centered on the header? |