Central Nebraska | I'm running a CIH Patriot 4430 sprayer with a Raven Viper Pro for the rate controller and guidance. Yesterday I started fall burndown and ran it with a Fieldview Drive for the first time. I thought I had everything setup correctly with boom sections but after my first pass I had to make some adjustments for the fence row nozzles. The boom is 120 feet with seven sections PLUS left and right fence rows. On my iPad I initially had it setup as 7 sections but it didn't map correctly. I eventually figured out that I had to make it 9 sections with 1 and 9 being set to 7 inches (the minimum allowed). Is this how it is supposed to be? Personally, I think it needs to have a separate option for the fence row nozzles or allow them to be set to zero so I don't have to enter the incorrect boom width.
(IMG_2149 (full).JPG)
(fullsizeoutput_4cd (full).jpeg)
(IMG_2151 (full).JPG)
Attachments ---------------- IMG_2149 (full).JPG (89KB - 89 downloads) fullsizeoutput_4cd (full).jpeg (65KB - 85 downloads) IMG_2151 (full).JPG (220KB - 83 downloads)
|