AgTalk Home
AgTalk Home
Search Forums | Classifieds (176) | Skins | Language
You are logged in as a guest. ( logon | register )

Pro 700 / IntelliView IV main harness pinout
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
torn
Posted 10/5/2018 14:33 (#7027540 - in reply to #7027478)
Subject: RE: Pro 700 / IntelliView IV main harness pinout


roaming
swenzel - 10/5/2018 12:47

Thank you very much! I was able to use pins 13,14,15 as suggested and the pro 700 came to life!

The display cable that I currently am using (CNH 47375328 out of a sprayer) has the following pins:

1 - yellow wire
2 - green wire

1 and 2 are twisted together as a pair

5 - yellow wire
6 - green wire

5 and 6 are twisted together as a pair.

It also have 13,14, and 15 which you already identified are used for power and ground. The cable that I have does not utilize pins 9 or 10. In a factory scenario does the 372 communicate via can with one of the pairs of yellow/green wires?

Yes. The specific CAN depends on the vehicle itself. In some cases it communicates on multiple CANs.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete all cookies set by this site)