Posted 10/5/2018 13:47 (#7027478 - in reply to #7027450) Subject: RE: Pro 700 / IntelliView IV main harness pinout
Thank you very much! I was able to use pins 13,14,15 as suggested and the pro 700 came to life!
The display cable that I currently am using (CNH 47375328 out of a sprayer) has the following pins:
1 - yellow wire
2 - green wire
1 and 2 are twisted together as a pair
5 - yellow wire
6 - green wire
5 and 6 are twisted together as a pair.
It also have 13,14, and 15 which you already identified are used for power and ground. The cable that I have does not utilize pins 9 or 10. In a factory scenario does the 372 communicate via can with one of the pairs of yellow/green wires?