ontpete - 9/30/2018 13:59
Can you put it back in the 4430 and see if everything works so you know the Incommand is not the problem.
Then I would try to move the display cable from 4430 to MX240 if it is not too big of a job.
I only have the 1 display cable. I move it with the incommand. So i dont see where moving back to the other tractor would matter since i know I have power at the plug the display cable plugs into.
The display cable also is less than a year old. | 
In command 1200 need help!!
