AgTalk Home
AgTalk Home
Search Forums | Classifieds (49) | Skins | Language
You are logged in as a guest. ( logon | register )

cruizer 2 to scs460
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
Amc4life
Posted 10/1/2018 08:26 (#7019054 - in reply to #7016225)
Subject: RE: cruizer 2 to scs460



Butterfield, MN
You have a couple options. You can use a 115-0171-793 plugged into port A for speed and a 115-0171-792 plugged into port B to get master sense to have the full width paint green when your master switch is turned on. The other option, as long as your 460 has a serial port on the back, is to get a 115-0172-054. This is probably a better idea, since it is an all-in-one cable, and it will actually paint on the Cruizer II with individual boom sections. One important thing to remember is to power up the 460 before you turn on the Cruizer II so it sees it as soon as the Cruizer II starts up. Otherwise, the boom sections may not show up on the Cruizer II.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)