|
Tuscola, IL | Yes, it's only available with a Pro 700. It's not that the Pro 600 is not capable of running electristeer, it's that the option for electristeer only came on V30 software. V30 is not available to download into the Pro 600.
Edit to add: If you're interested in electristeer, but don't have a Pro 700, it's likely just as cost effective, if not cheaper, to go with an AgLeader Ontrac and Compass display. Performance is every bit as good and the steering system is identical. The only difference is that you'd be using an AgLeader display. The one advantage there is that the AgLeader system allows you to do calibrations through the display where the Electristeer has to be done on a laptop. No major difference except that you don't have to have a laptop in the cab hooked to an ethernet cable that is about 1 foot too short to set to the side while the machine calibrates.
Edited by CASE3594 9/25/2018 21:52
| |
|