|
Central Kansas | Here’s my situation, installed a 3000 receiver on my combine. Running a brown box with a ATU 200 and now when I finish my gps guided swath and turn around to start the next swath, I get this message: “CAN high voltage LOW
CAN low voltage LOW”
While running a swath, numbers show 2.2 to 2.0 voltage, when I get the message and look at the voltage it drops to 1.7 on both high and low. Switched and unswitched voltage shows just under 13v.
What is going on here and what do I need to do to fix this problem?
FYI Case-IH 2188, also NOT impressed with how long it takes to get satellites loaded, no faster than the ITC it replaced! Maybe it will get better when this problem gets fixed.
Thanks | |
|
What is CAN high and low voltage?
