|
Parker, SD | End of last year we noticed issue with gps resume and head resume/lift, this summer doing oats the fore aft tilt on the draper wouldn't work. Now GPS resume won't go at all. I've decided the issue must be the shift button back side of the MFH. Is there a way to test this or verify it has is not functioning. Is there possibly a setting? Pro 700 monitor. The only reason I don't believe the switch has failed is I would get error messages when trying to tilt the head while holding the shift button vs normal operation. I don't recall the exact wording of the error it would only flash a second and didn't log a fault. I removed the right hand console and verified the wires from the MFH to the module board | |
|