|
Nebraska Panhandle | Have 80 ft. Bestway sprayer. The outer boom
dropped down on the sprayer tire going down
the road. Front of boom was in the cradle but
it came off the back carrier bracket.
Ground off tire about 3/4
inch x1 inch spot on end of each lug before
I noticed it. The small square tubing on boom
were nozzles mount wore half way through.
The big square tubing wore one edge off - not
clear through. What would be the best way to fix or brace the tubing?
Clamp angle iron around it where it is worn?
I suspect the bolts where it pivots when you fold it are worn some and it won’t stay up on the back
carrier bracket right. Anyone ever have this happen?
| |
|
Bestway Pro 4 sprayer boom question
