Posted 9/9/2018 19:00 (#6979215 - in reply to #6976909) Subject: RE: adding new lightbar gps to raven system
I hate to dump water on this, but a Cruizer II will not connect to a SCS4400. It will connect to a 440 and that family, but not the 4000 series, unfortunately. You also can't (easily) connect just AccuBoom to a Cruizer II to turn sections on and off for the 4400 system and have it map sections that way. There's a whole explanation about CAN communication and so forth, but take my word for it. I'd just like to keep you from going through the headaches of it. Instead, if you could find yourself a used Envizio Pro, that would connect right in with it and give you guidance and mapping, plus it's the next step up in the Raven lineup (or at least it was in the last generation of field computers), so it has a little bit bigger screen. Envizio Pro would also work with AccuBoom, even with the 4400 in the system, if you wanted to add that in down the road for automatic section shut-off.