|
WC Mn/Dakotas | If you take the time once and do it right (per the manual) and do multipoint and right the numbers down, it will probably be right until you have to replace a sensor. Have a number for wetter and one for drier and for each crop type. Then you can reuse them.
If you do this, you wont have to "recalibrate" for each field. Anyone that thinks they need to "recalibrate" tells me they are not doing it right.
The farther apart your calibration points are the more accurate changes in conditions will be represented. If you only take 1 (or 2 that are very close) any change in conditions will throw the data off one way or the other causing you to "recalibrate" again | |
|