AgTalk Home
AgTalk Home
Search Forums | Classifieds (1) | Skins | Language
You are logged in as a guest. ( logon | register )

660 raven to a 2630
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
tedbear
Posted 9/4/2018 06:37 (#6968605 - in reply to #6967768)
Subject: RE: 660 raven to a 2630


Near Intersection of I-35 & I-90 Southern Mn.
My nephew has a 7830 and we needed speed to a Raven. I could have gotten a cable that went to the corner post connector but it was expensive and stuck out in the way. Instead I made a tee that goes in between a pair of connectors in the cavity behind the dash displays on the right side of the cab. By removing the phillips screw the plastic wedge can be removed and the displays tipped in out of the way. Within the mass of wires under the displays there was a connector that was labelled Radar. I disconnected the connector and put the Tee in between and ran the new cable out the front of the side console into the cab where it was connected to the Raven. This was cheaper and worked out better for us.

This arrangement is for 30 series and maybe newer.

Edited by tedbear 9/4/2018 06:40
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)