AgTalk Home
AgTalk Home
Search Forums | Classifieds (5) | Skins | Language
You are logged in as a guest. ( logon | register )

Is the AMP connector the industry standard?
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
co2shaun
Posted 8/10/2018 21:52 (#6923119 - in reply to #6922358)
Subject: RE: Is the AMP connector the industry standard?


NW KS
As mentioned there really isn't a standard wiring plug for power. Just about every system has there own way of getting power. The 12 volt power strips help but often you are going to have to make your own adapter. Some manufactures will recommend that you wire there product directly to the battery for best results but often you can get away with not doing so as long as the setup is reasonable. Key word is reasonable, If it draws a few amps making an adapter to go to a 12 volt power strip is probably fine but if it draws 50 you might want to go with a direct connection.

I have been using the John deere power strip. The thing that I like about those strips is that you can use a standard spade connector that you can get from any automotive store if you need to make a connection in a hurry. This is more of a temporary setup but is nice to be able to do if you damage a cord or don't have the correct connections for an adapter. You can also get a cord from john deere with just the power strip end to make a proper adapter for more permanent setups.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)