|
| I bought a NH T8040 for pulling my old graincart so I could put the Steiger 400 on the new graincart.
The NH T8040 came with an FM 1000. Splash screen says it's a CNH display so I'm not sure what implications that has for firmware, etc. Buttons show blue tractors so I suppose the CNH firmware is a New Holland flavor.
Anyway, I have 3 AgCam cameras on the graincart. I would like to feed them into the FM 1000. The owner's manual really does not say much about how to do this. CAN port A and serial port D are empty.
I called AgExpress. They said they have a cable for a single camera in stock but they say they have never built anything for multiple cameras on the FM 1000. They are looking into it. I am concerned that since serial port C is being used, if the cameras are supposed to plug into C, perhaps I need to re-pin the connector that is plugged in there?
I'm not really sure what that connector does. I know the FM 1000 is connected to the auto-steer. That cable goes into the back left cornerpost and dissapears.
If anyone has any suggestions I would appreciate it. Pictures will be loading shortly:
(6CA15AFE-8856-415A-9DBE-A4BC0B504581 (full).jpeg)
(614972B3-2771-462C-9593-D2A37669D864 (full).jpeg)
(A43CD118-3C33-402E-9A02-7F6B69746E70 (full).jpeg)
(4939FCFE-C7DC-4298-82FE-E165C2884573 (full).jpeg)
(828C0E4A-D539-483D-99A3-BB2B99848FD1 (full).jpeg)
Attachments ---------------- 6CA15AFE-8856-415A-9DBE-A4BC0B504581 (full).jpeg (131KB - 100 downloads) 614972B3-2771-462C-9593-D2A37669D864 (full).jpeg (129KB - 92 downloads) A43CD118-3C33-402E-9A02-7F6B69746E70 (full).jpeg (133KB - 92 downloads) 4939FCFE-C7DC-4298-82FE-E165C2884573 (full).jpeg (80KB - 92 downloads) 828C0E4A-D539-483D-99A3-BB2B99848FD1 (full).jpeg (112KB - 95 downloads)
| |
|