AgTalk Home
AgTalk Home
Search Forums | Classifieds | Skins | Language
You are logged in as a guest. ( logon | register )

Trimble and twin row planter??
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
premoj
Posted 8/2/2018 08:51 (#6906956 - in reply to #6906113)
Subject: RE: Trimble and twin row planter??



You will have to adjust the settings and tell it that it is a 12 row planter, and then turn off which ever rows are not being used in the seed monitoring section. It sounds to me like someplace in the setup settings or implement settings it is still seeing 24row instead of 12. It should work or I would have heard about from my customer. Unfortunately my simulator won't show me in operation to test it out. What firmware version are you running on the FMX, FIQ, SMM, and other trimble modules are you running? What corrections level are you planting with (WAAS limited to 9.25 Firmware on gen1 and 2 FMX or it gets bogged down by too many satellites in view)?
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)